How To Remove The Case Assembly Lamp - LG LRMVS3006 Series Service Manual

3-28 HOW TO REMOVE AND REINSTALL THE CASE ASSEMBLY LAMP
When servicing the LEDs, Cover,Lamp is positively necessary.
1. Open the home bar.
3. Pull a screw using a Plier and disassemble the cover.
4. 1) Push the flat screwdriver in the rear of the LED lamp and take the lamp out from the hook.
2) Disassemble the combined housing with the flat screwdriver.
3) You should take LED lamps out and pull from the right.
2. Tighten a screw to the cover.
-26-
Copyright © 2019 LG Electronics Inc. All rights
reserved. Only training and service purposes.