Advertisement
DRH
Hardware Maintenance Guide
Figure 4-2 Removing the metal sheet from a DRH installed in centralized mode
Step 8 Use an M6 inner hexagon torque wrench to loosen the captive screw on the attachment plate,
as shown in
Issue 1.0(2013-04-10)
The subsequent operations are the same as those in the procedure for replacing a single DRH.
Figure
4-3, then raise the DRH bottom to remove it, as shown in
In scenarios where DRHs are installed in centralized mode, the DRH in the middle can be removed
without removing the two DRHs on its right and left sides. The procedure is identical to the procedure
for removing a single DRH.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Replacing a DRH
Figure
4-4.
8
Advertisement
