Download Print this page

Tumbl Trak Brianna Beam Assembly Instructions

Brianna Beam Assembly Instructions

Thank you for purchasing the Brianna Beam. We

hope you will enjoy years of use with this product.

After opening the boxes, please check the

parts list to make sure all pieces have arrived

in good condition.

If you have any questions during this assembly

process, please call customer service at

Parts List

Parts:

[A] Beam

[B] (2) Beam Legs

[C] Vinyl Sheet cover for beam legs

[D] Wooden Dowel

*No tools needed

For questions or problems, please call Tumbl Trak at

(800) 331-4362

1-800-331-4362.

Wooden Dowel

Table of Contents

Do you have a question about the Brianna Beam and is the answer not in the manual?

Page 1 Brianna Beam Assembly Instructions Thank you for purchasing the Brianna Beam. We hope you will enjoy years of use with this product. After opening the boxes, please check the parts list to make sure all pieces have arrived in good condition.
Page 2 (3B) Place the peg in the hole of the beam. Step-3A Step-3B STEP 4- (4A) Slide the two beams together. (4B) Secure the Velcro straps on the sides of the beam. Step-4A Step-4B For questions or problems, please call Tumbl Trak at (800) 331-4362...
Page 3 Accessories for the Brianna Beam The following accessories can be purchased from Tumbl Trak’s website at www.tumbltrak.com or by calling 1-800-331-4362. Optional Beam Legs  Adds another 6” of height to the Brianna Beam  No tools needed for assembly 5’x10’...