Tumbl Trak Laser Beam Pro Assembly Instructions

Table of Contents

Download this manual

Assembly Instructions

Laser Beam Pro

Thank you for purchasing

the Laser Beam Pro. We

hope you will enjoy years

of use of this product.

After opening the boxes,

please check the parts list

to make sure all pieces

condition. If you have any

assembly process, please

call customer service at

Parts List:

[A] Beam Pieces (qty 3)

[B] Allen Wrench (qty 1)

[C] Connector Plates (qty 2)

Star Washers (qty 8)

Screws (qty 8)

[D] Laser Beam Pro Cover

Any questions or problems, please call Tumbl Trak at

have arrived in good

questions during this

1-800-331-4362.

Parts List

(800) 331-4362

Table of Contents

Do you have a question about the Laser Beam Pro and is the answer not in the manual?

Page 1 Parts List: [A] Beam Pieces (qty 3) [B] Allen Wrench (qty 1) [C] Connector Plates (qty 2) Star Washers (qty 8) Screws (qty 8) [D] Laser Beam Pro Cover Any questions or problems, please call Tumbl Trak at (800) 331-4362...
Page 2 Tighten all remaining star washers & screws. the screws with the Allen wrench. NOTE: Tumbl Trak equipment is not recommended for the use in Parkour/Free Running related activities. Any questions or problems, please call Tumbl Trak at (800) 331-4362...
Page 3 Carrying the beam by the ends may cause the metal plate to bend. Turn the beam sideways when moving to prevent the beam from sagging. NOTE: Tumbl Trak equipment is not recommended for the use in Parkour/Free Running related activities. Any questions or problems, please call Tumbl Trak at (800) 331-4362...