Advertisement
Quick Links
Assembly Instructions
Boundex
Parts List
Parts:
A. (4) Foam covered support bars
B. (4) Upright legs with D2 knobs
C. (1) Yellow Lycra bed
D. (2) Small top layers of Lycra with
bungee corners
E.
(1) Blue Lycra skirt
F.
(1) Not pictured: Drawstring carrying bag
E.
C.
A.
A.
Any questions or problems, please call Tumbl Trak at (800) 331-4362
General Lycra Care Tips
•
Hand or machine wash in lukewarm water on
gentle cycle using mild detergent
D.
•
Do not use chlorine bleach on any fabric containing
Lycra
•
Rinse thoroughly
•
Drip dry. If machine dried, use low temperature
•
Do not iron
B.
Thank you for investing in the
Tumbl Trak Boundex. After
opening the boxes, please check
the parts list to make sure all
pieces have arrived in good
condition. If you have any
questions during the
assembly process, please call
customer service at
1-800-331-4362.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tumbl Trak Boundex
Summary of Contents for Tumbl Trak Boundex
- Page 1 • Do not use chlorine bleach on any fabric containing Lycra • Rinse thoroughly • Drip dry. If machine dried, use low temperature • Do not iron Any questions or problems, please call Tumbl Trak at (800) 331-4362...
- Page 2 STEP 2 — Feed one foam covered support bar through each sleeve of the Lycra bed, forming the square for the top of the Boundex. STEP 2 (A) — Make sure each bar is facing outward. Step 2 A...
- Page 3 D2 knobs. Make sure all ends are tightened. Step 6 STEP 7— Once the Boundex frame is completely set up, lay one of the small layers of Lycra on top on the yellow bed and align the bungees at the four corners.
- Page 4 STEP 11 — Stretch corners of Lycra skirt over the knobs until the legs are covered. Step 12 STEP 12— The Lycra skirt will cover each side of the Boundex. Any questions or problems, please call Tumbl Trak at (800) 331-4362...
Need help?
Do you have a question about the Boundex and is the answer not in the manual?
Questions and answers