Firmware Renewal Mode - Philips DVDR3475/37 Service Manual

1. Turn the power on and remove the disc on the tray.
2. To put the DVD recorder into version up mode,
press [SKIP], [6], [5], and [4] buttons on the remote
control unit in the order. Then the tray will open
automatically.
Fig. a appears on the screen and Fig. b appears
on the VFD.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Please insert a disc.
Fig. a Version Up Mode Screen
Fig. b VFD in Version Up Mode
3. Load the disc for version up.
Fig. c appears on the screen. The file on the top is
highlighted as the default.
When there is only one file to exist, Step 4 will
start automatically.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Disc name VOL_200703250934
is displayed.
1 RL4P10210H1E
2 RL4P10211H1E
3 RL4P10212H1E
4 RL4P10213H1E
Fig. c Update Disc Screen
All manuals and user guides at all-guides.com

FIRMWARE RENEWAL MODE

Current
ver. RL4P*****H1E
F/W version
is displayed.
ver. RL4P*****H1E
Files included
in the disc are
displayed.
1 / 1
1-9-1
4. Select the firmware version pressing arrow
buttons, then press [OK].
Fig. d appears on the screen and Fig. e appears
on the VFD. The DVD recorder starts updating.
About VFD indication of Fig. e:
1) When Fig. d is displayed on the screen, "F-UP"
is displayed on the VFD.
2) When "Firmware Updating... XX% Complete."
is displayed on the screen, "10210" is displayed
on the VFD.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
(*1)
File Loading...
Fig. d Programming Mode Screen
Fig. e VFD in Programming Mode (Example)
The appearance shown in (*1) of Fig. d is
described as follows.
No. Appearance
1 File Loading... Sending files into the memory
Firmware
2 Updating... Writing new version data
XX% Complete.
Firmware
--- Failed in updating
Update Failure
5. After updating is finished, the tray opens
automatically.
At this time, no button is available.
6. Pull out the AC code once, then insert it again.
ver. RL4P*****H1E
State
E7E4AFW