Firmware Renewal Mode - Philips DVDR3545V/37 Service Manual

1. Turn the power on and remove the disc on the tray.
2. To put the DVD recorder into version up mode,
press [DVD], [SKIP], [6], [5], and [4] buttons on the
remote control unit in the order. Then the tray will
open automatically.
Fig. a appears on the screen and Fig. b appears
on the VFD.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Please insert a disc.
Fig. a Version Up Mode Screen
Fig. b VFD in Version Up Mode
3. Load the disc for version up.
Fig. c appears on the screen. The file on the top is
highlighted as the default.
When there is only one file to exist, Step 4 will
start automatically.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Disc name VOL_200703250934
is displayed.
1 WD4P10210H1E
2 WD4P10211H1E
3 WD4P10212H1E
4 WD4P10213H1E
Fig. c Update Disc Screen

FIRMWARE RENEWAL MODE

Current
ver. WD4P*****H1E
F/W version
is displayed.
ver. WD4P*****H1E
Files included
in the disc are
displayed.
1 / 1
4. Select the firmware version pressing arrow
buttons, then press [OK].
Fig. d appears on the screen and Fig. e appears
on the VFD. The DVD recorder starts updating.
About VFD indication of Fig. e:
1) When Fig. d is displayed on the screen, "F-UP"
is displayed on the VFD.
2) When "Firmware Updating... XX% Complete."
is displayed on the screen, "10210" is displayed
on the VFD.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
(*1)
File Loading...
Fig. d Programming Mode Screen
Fig. e VFD in Programming Mode (Example)
The appearance shown in (*1) of Fig. d is
described as follows.
No. Appearance
1 File Loading...
Firmware
2 Updating...
XX% Complete.
Firmware
---
Update Failure
5. After updating is finished, the tray opens
automatically.
At this time, no button is available.
6. Pull out the AC code once, then insert it again.
1-11-1
ver. WD4P*****H1E
State
Sending files into the memory
Writing new version data
Failed in updating
E9H90FW