Table of Contents
Advertisement
1.5
Measuring Instruments, Tools, and Accessories
While mounting, commissioning, and maintaining the module use the equipment, tools, and
accessories shown in Table 1.5.1.
Instruments
Digital multimeter
Flat head screwdriver
Cross slot screwdriver
Side-cutting pliers
Pliers
S2000-APA
1.6
Marking and Sealing
1.6.1 Each S2000-AR8 carries a marking placed on the rear side of its enclosure.
1.6.2 The marking contains: the name of the product, its decimal number, the factory number, the
year and the quarter of production, and conformity marks.
1.6.3 The fastening screw is factory-sealed with paint.
1.6.4 Tampering with the seal automatically voids all warranties.
1.7
Packaging
S2000-AR8 with accessories kit and operations manual are packaged into a separate cardboard
box.
2.1
Operating Restrictions
The design of the module doesn't provide operating it in aggressive and dusty environments
and in explosion hazardous premises.
2.2
Preparing for Use
2.2.1 Safety Precautions
– The design of the S2000-AR8 meets the requirements of electric and fire safety including
emergency operation in accordance with Russian Standards GOST 12.2.007.0-75 and GOST
12.1.004-91;
– There are no potential hazard circuits within the S2000-AR8;
– Do SHUT OFF power from the S2000-AR8 before mounting, installing, and maintaining this
one;
– Mounting and maintenance of the S2000-AR8 shall be carried out by persons with the second
or higher electric safety qualification level.
7
Specifications
Measures AC/DC voltage up to 500 V, current up to 5A, resistance up to
2 MOhm
3.0 × 50 mm
2 x 100 mm
160 mm
160 mm
Standalone addressable device programmer (optional)
2 Intended Use
Table 1.5.1
Advertisement
Table of Contents
