Setup
3 Enter the name and IP Address of the appliance. If you have created domains, you may select a
domain from the drop-down list. If no domains have been created, the appliance will be placed in
the default domain.
NOTE
The Port field is default to 22. If your workstation is configured in a Network Access Translation environment
(NAT), you will need to enter the NAT access port number in the Port field when adding an appliance and point
to port 22 in the NAT access point.
4 Enter the username and password.
5 Click OK.
52
Sentriant NG Operation Console User Guide, Software Version 2.5