Extreme Networks NG300 User Manual page 32

Monitor
Details Panel Drop-down Lists
Threat/Trend - The first drop-down list toggles the Details Panel between displaying the threats/
response counter and list to the trend chart.
Threat Filter - The second drop-down list filters the threat priorities that are displayed in the counter
and information list. Selecting a threat priority will display data only for the selected priority.
Response Filter - The third drop-down list filters response types that are displayed in the counter and
information list. Selecting a response type will display data only for the selected response.
Counters
Counters can be toggled between threats and responses by clicking the tabs located below the counter.
The counter can show threat and response counts for a single appliance or a roll up of threats and
responses if a domain is selected.
Information List
The information list displays a breakdown of all threats detected from a domain or appliance. This view
differs from the Information Panel in that the Information Panel shows a roll up of the highest threat
priority only. The detail information list displays a breakdown of all threats detected. The following
data is displayed in the information list:
threat priority will show the highest threat priority for a source, however the source may have
●
triggered lower priority threats.
name of the rule that has been broken
●
source IP Address
●
date and time the threat triggered
●
status and name of the appliance that received a threat
●
response type taken against the threat
●
34
Sentriant NG Operation Console User Guide, Software Version 2.5