Technical Data; Installation - Electrolux ERG47800 User Manual

12 electrolux

Technical data

Dimension of the recess
Rising Time
The technical information are situated in the
rating plate on the internal left side of the ap-
pliance and in the energy label.

Installation

Positioning
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The Manufacturer declines all responsibility if
the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
Height adjustment
The height of the appliance is adjustable from
820 to 870 mm to fine up with existing kitch-
en units.
Height
Width
Depth
Before installing the appliance between units,
adjust the height of the feet and rear wheels.
The wheels are factory set for a height of 820
mm. To align the appliance to a height of 870
mm, raise it by adjusting the feet with a span-
ner, then remove the wheels and refit them
in the lowest position.
1900 mm
860 mm
550 mm
14 h