Advertisement
Quick Links
9 Piece Counter Height Dining Set
ITM. / ART. 2000706
Model # SAV9PCH-N
ASSEMBLY INSTRUCTIONS
IMPORTANT,
RETAIN
FOR
FUTURE
REFERENCE: READ CAREFULLY
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-877-494-2536 (English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(In U.S., Canada, and Mexico only)
Or visit our website www.baysidefurnishings.com
Or e-mail your request to parts@baysidefurnishings.com
Date 2017-12-20 Rev. 0001-A Factory: CHYEWO
Advertisement
Related Manuals for Bayside SAV9PCH-N
Summary of Contents for Bayside SAV9PCH-N
- Page 1 9 Piece Counter Height Dining Set ITM. / ART. 2000706 Model # SAV9PCH-N ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FUTURE REFERENCE: READ CAREFULLY If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
- Page 2 G E N E R A L I N F O R M A T I O N , T I P S A N D T R I C K S 1. Please read the Assembly Instructions prior to assembling the unit. 2.
- Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Table Top (1x) B- Outer Leg (2x) C- Inner Leg (2x) (With one Female Plastic Fitting) D- Stretcher (1x) E- Mounting Board (2x) F- Tenon Attachment (2x)
- Page 4 Assembly Instructions BB EE DO NOT fully tighten the bolts or nuts initially until all the bolts or nuts are ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts. 1. Unpack the unit and confirm that you have all the hardware and required parts. 2.
- Page 5 Assembly Instructions 5. Align the center holes of one mounting board (E) with the locator dowels on the top of legs (B and C) and press them together. Insert four bolts (AA) with lock washers (BB) and large flat washers (CC) through the countersunk holes of the mounting board (E) and securely screw into the legs (B and C).
- Page 6 Assembly Instructions 8. Place the table top (A) upside down on a level and protective surface. 9. Flip the assembled base upside down and align the drilled holes on mounting boards (E) with the threaded inserts on the slide supports on the table top (A). Insert eight bolts (AA) with lock washers (BB) and large flat washers (CC) through the drilled holes on the mounting boards (E) and then securely screw into the slide supports, using the enclosed hex wrench.
- Page 7 Assembly Instructions 10. Ask for assistance to lift the unit upright and position it at the desired location. 11. Unlock the sash locks underneath the table top (A) and then pull the table top wide open equally from both ends. 12.
- Page 8 To Store the Butterfly Leaf When Not In Use 15. Unlock the sash locks underneath the table top (A) and then pull the table top wide open equally from both ends. 16. Fold two center leaves together and flip down the leaf aprons. 17.
-
Page 9: Care And Maintenance
Should this product be defective in workmanship or materials or fail under normal use, we will repair or ® replace it for up to one (1) year from date of purchase. Every Bayside Furnishings product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.