Page 1
9-piece Dining Set ITM. / ART. 1158046 Model # CSC9PD-3 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FUTURE REFERENCE: READ CAREFULLY If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your...
Page 2
G E N E R A L I N F O R M A T I O N A N D T I P S 1. This product is for indoor domestic use only. 2. Please read the Assembly Instructions prior to assembling this product. 3.
Page 3
Parts and Hardware List PART # PART DESCRIPTION PART FIGURE QUANTITY Table Top Outer Leg Inner Leg Stretcher Mounting Board Tenon Attachment...
Page 4
Parts and Hardware List PART PART # PART FIGURE QUANTITY DESCRIPTION Bolt 16+1 extra Bolt 4+1 extra Lock Washer 20+1 extra Flat Washer 20+1 extra Wood Dowel 6+1 extra Hex-key Wrench Touch-up Pen Tools required: Hex-key wrench (included) and Phillips screwdriver (not included).
Page 5
Assembly Instructions 1. Unpack the unit and confirm that you have all the hardware and required parts. Position the table top (A) upside down on a smooth and protective surface. 2. Remove the legs (B and C), the mounting boards (E) and the stretcher (D) from the table top (A) by unscrewing the wood blocks which hold the nylon straps in place, using a Phillips screwdriver.
Page 6
Assembly Instructions 6. Insert four wood dowels (EE) into the non-threaded holes on the legs (B and C). Position the mounting boards (E) onto the inserted wood dowels (EE) and attach them to the legs (B and C) with eight bolts (AA) and eight washers (CC and DD).
Page 7
Assembly Instructions 9. Ask for assistance to lift the unit upright and position it at the desired location. 10. To add the leaf extension, unlock the sash locks underneath the table top (A) by rotating the lock handle all the way to the “OFF” marking on the sash locks and pull the table top wide open equally from both ends. 11.
Page 8
To Store the Butterfly Leaf When Not In Use 14. To store the center leaf when not in use, unlock the sash locks underneath the table top (A) by rotating the lock handle all the way to the “OFF” marking on the sash locks, then pull the table top wide open equally from both ends.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or ® replace it for up to one (1) year from date of purchase. Every Bayside Furnishings product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
Need help?
Do you have a question about the CSC9PD-3 and is the answer not in the manual?
Questions and answers
What size bolts are part number AA
The Bayside part number CSC9PD-3 uses the following compatible bolts:
- AA Bolt: 4 + 1 extra
- BB Bolt: 8 + 1 extra
The exact size (length and diameter) of the bolts is not specified in the provided information.
This answer is automatically generated