Advertisement
AA
BB
CC
8. Place the table top (A) upside down on a level and protective surface.
9. Flip the assembled base upside down and align the drilled holes on mounting boards (E) with the
threaded inserts on the slide supports on the table top (A). Insert eight bolts (AA) with lock washers
(BB) and large flat washers (CC) through the drilled holes on the mounting boards (E) and then
securely screw into the slide supports, using the enclosed hex wrench.
Assembly Instructions
AA
BB
CC
AA
BB
CC
E
A
E
6
AA
BB
CC
Advertisement
