Extreme Networks Summit Summit24 Installation And User Manual page 148

Status Monitoring and Statistics
Table 39: Status Monitoring Commands (continued)
Command
show log {<priority>}
show log config
show memory {detail}
show switch
show tech-support
show version
148
Description
Displays the current snapshot of the log. Options
include:
• priority — Filters the log to display message
with the selected priority or higher (more critical).
Priorities include critical, emergency, alert, error,
warning, notice, info, and debug. If not specified,
all messages are displayed.
Displays the log configuration, including the syslog
host IP address, the priority level of messages being
logged locally, and the priority level of messages
being sent to the syslog host.
Displays the current system memory information.
Specify the detail option to view task-specific
memory usage.
Displays the current switch information, including:
• sysName, sysLocation, sysContact
• MAC address
• Current time and time, system uptime, and time
zone
• Operating environment (fans)
• NVRAM configuration information
• Scheduled reboot information
Displays the output for the following commands:
• show version
• show switch
• show config
• show diag
• show gdb
• show iparp
• show ipfdb
• show ipstats
• show iproute
• show ipmc cache detail
• show igmp snooping detail
• show memory detail
• show log
It also displays the output from internal debug
commands. This command disables the CLI paging
feature.
Displays the hardware and software versions currently
running on the switch.
Summit24e3 Switch Installation and User Guide