Extreme Networks Summit Summit24 Quick Reference Manual page 2

Command
config timezone <gmt_offset> {autodst |
noautodst}
config vlan <name> ipaddress <ip_address>
{<mask>}
create account [admin | user] <username>
{encrypted} {<password>}
create vlan <name>
delete account <username>
delete vlan <name>
disable bootp vlan [<name> | all]
disable cli-config-logging
disable clipaging
disable idletimeouts
disable ports <portlist>
disable ssh2
disable telnet
enable bootp vlan [<name> | all]
enable cli-config-logging
enable clipaging
enable idletimeouts
enable ssh2 {port <tcp_port_number>}
enable telnet {port <tcp_port_number>}
history
2
Description
Configures the time zone information to the configured offset
from GMT time. The format of gmt_offset is +/- minutes from
GMT time. Specify:
autodst — Enables automatic Daylight Savings Time
I
change.
nosautodst — Disables automatic Daylight Savings Time
I
change.
The default setting is autodst.
Configures an IP address and subnet mask for a VLAN.
Creates a user account. This command is available to
admin-level users and to users with RADIUS command
authorization. The username is between 1 and 32 characters, the
password is between 0 and 16 characters.
Creates a VLAN.
Deletes a user account.
Deletes a VLAN.
Disables BOOTP for one or more VLANs.
Disables logging of CLI commands to the Syslog.
Disables pausing of the screen display when a show command
output reaches the end of the page.
Disables the timer that disconnects all sessions. Once disabled,
console sessions remain open until the switch is rebooted or you
logoff. Telnet sessions remain open until you close the Telnet
client.
Disables a port on the switch.
Disables SSH2 Telnet access to the switch.
Disables Telnet access to the switch.
Enables BOOTP for one or more VLANs.
Enables the logging of CLI configuration commands to the
Syslog for auditing purposes. The default setting is enabled.
Enables pausing of the screen display when show command
output reaches the end of the page. The default setting is
enabled.
Enables a timer that disconnects all sessions (both Telnet and
console) after 20 minutes of inactivity. The default setting is
disabled.
Enables SSH2 Telnet sessions. By default, SSH2 uses TCP port
number 22.
Enables Telnet access to the switch. By default, Telnet uses
TCP port number 23.
Displays the previous 49 commands entered on the switch.
Summit24e3 Switch Quick Reference Guide