Extreme Networks Summit Summit24 Quick Reference Manual page 7

Configuring Ports on a Switch Commands
Command
config ports <portlist> auto off {speed [10 |
100 | 1000]} duplex [half | full]
config ports <portlist> auto on
config ports <portlist> display-string <string>
config sharing address-based [mac_source |
mac_destination | mac_source_destination |
ip_source | ip_destination |
ip_source_destination]
disable edp ports <portlist>
disable ports <portlist
disable ports <portlist>
disable sharing <port>
enable edp ports <portlist>
enable ports <portlist>
enable sharing <port> grouping <portlist>
{address-based}
restart ports <portlist>
show edp
show ports {<portlist>} collisions
show ports {<portlist>} configuration
show ports {<portlist>} info {detail}
show ports {<portlist>} packet
show ports {<portlist>} rxerrors
show ports {<portlist>} stats
show ports {<portlist>} txerrors
Summit24e3 Switch Quick Reference Guide
Description
Changes the configuration of a group of ports. Specify the
following:
auto off — The port will not autonegotiate the settings.
I
speed — The speed of the port (for 10/100 Mbps or
I
100/1000 Mbps ports only).
duplex — The duplex setting (half- or full-duplex).
I
Enables autonegotiation for the particular port type; 802.3u for
10/100 Mbps ports or 802.3z for Gigabit Ethernet ports.
Configures a user-defined string for a port. The string is
displayed in certain show commands (for example, show port
all info). The string can be up to 16 characters.
Configures the part of the packet examined by the switch when
selecting the egress port for transmitting load-sharing data. This
feature is available using the address-based load-sharing
algorithm, only.
Disable EDP on one or more ports.
Disables a port. Even when disabled, the link is available for
diagnostic purposes.
Disables a port. Even when disabled, the link is available for
diagnostic purposes.
Disables a load-sharing group of ports.
Enables the generation and processing of EDP messages on
one or more ports. The default setting is enabled.
Enables a port.
Defines a load-sharing group of ports. The ports specified in
<portlist> are grouped to the master port. The optional
load-sharing algorithm, address-based, uses addressing
information as criteria for egress port selection.
Resets autonegotiation for one or more ports by resetting the
physical link.
Displays EDP information.
Displays real-time collision statistics.
Displays the port configuration.
Displays detailed system-related information.
Displays a histogram of packet statistics.
Displays real-time receive error statistics.
Displays real-time port statistics.
Displays real-time transmit error statistics.
7