Table of Contents
Advertisement
Installation
Preparation for installation
The cooker hood must be mounted so that the minimum
distance between the fi lters and the gas or electric hob is
65cm.
The ducting system for this cooker hood must not be
connected to an existing ventilation system which is being used
for any other purpose.
We recommend an air exhaust tube which is the same
diameter as the air exhaust outlet hole. If a two-part air
exhaust tube is used, the upper part must be placed outside
the lower part.
If installing this cooker hood between adjoining wall cabinets,
the wall cabinets must not overhang the hob.
Before beginning installation, remove the fi lters (see page 8).
This will make the unit easier to handle during installation.
Installing the Cooker Hood
1 Drill holes (A) 235mm apart to allow you to fi x the cooker
hood to the wall.
2 Fix the cooker hood to the wall and align it horizontally.
10
3 Adjust the width of the support bracket for the upper fl ue
and insert screws to attach it to the wall.
4 Connect the fl ange (C) to the air exhaust hole.
A
B
Cooker hood user guide
C
Advertisement
Table of Contents
