Advertisement
Quick Links
Geosense Quick Guide—GeoLogger Link V1.0
Geosense Ltd
Nova House. Rougham Industrial Estate. Rougham. Bury St Edmunds. IP30 9ND. UK
Tel: +44 (0) 1359 270457. Fax: +44(0) 1358 272860
emal: info@geosense.co.uk. www.geosense.co.uk
4. Replace the lid on the battery
holder and re-fit the battery
holder onto the underside of the
lid.
5. Close the lid and press hard on
the quick-release latch.
6. The lid is now closed and fully
sealed.
4
Geosense Quick Guide—GeoLogger Link V1.0
QUICK GUIDE
GeoLogger Linx
The GeoLogger Linx is supplied with:
•
Set of batteries (AA or C depending on model)
•
A USB containing the software for use on a Windows PC
•
A small screwdriver
FOR FURTHER INFORMATION PLEASE REFER TO THE LINX
LOGGER INSTRUCTION MANUAL WHICH IS PART OF THE
LINX SOFTWARE
1
Advertisement
Related Manuals for Geosense GeoLogger Linx
Summary of Contents for Geosense GeoLogger Linx
- Page 1 5. Close the lid and press hard on the quick-release latch. 6. The lid is now closed and fully sealed. The GeoLogger Linx is supplied with: • Set of batteries (AA or C depending on model) • A USB containing the software for use on a Windows PC •...
- Page 2 Geosense Quick Guide—GeoLogger Link V1.0 Geosense Quick Guide—GeoLogger Link V1.0 1. To open the lid on the Linx Logger place a small flat ended 3. Remove the battery holder, undo the screw securing the lid and screwdriver (3-4mm) into the slot on the left hand side of the lid.
Need help?
Do you have a question about the GeoLogger Linx and is the answer not in the manual?
Questions and answers