Table of Contents
Advertisement
PLACEMENT
•
The refrigerator should not be placed in direct sunlight or close to heat sources such
as oven, grill, radiator, etc. Also avoid locations where the unit will be exposed to
moisture or can be easily splashed.
•
Place the unit on a firm flat surface. An uneven floor will cause vibration and noise.
•
Good ventilation around the refrigerator allows heat to escape smoothly, improving
cooling efficiency and saving energy. To maintain high operating efficiency, do not
place anything on top of the refrigerator.
•
This refrigerator is meant to be installed free-standing, and not built-in or enclosed.
Be sure to leave space around the appliance to allow for proper air circulation for
cooling the compressor. This improves efficiency and saves energy.
•
After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3
hours before placing food into the refrigerator.
When installing the unit on a table or countertop
•
Surface (countertop) must be flat, level, and strong enough to support the unit once it
is fully loaded.
•
Surface must be wide enough to accommodate the unit without any overhang.
•
Surface must be deep enough to accommodate the unit when the door is opened to
90º.
LOCATION OF PARTS
INSTALLATION
4
, keep the following in mind:
Advertisement
Table of Contents
