Related Manuals for Summit FFAR2L
Summary of Contents for Summit FFAR2L
- Page 1 FELIX STORCH, INC. SUMMIT APPLIANCE DIVISION ® INSTRUCTION MANUAL FOR MODEL: FFAR2L-SL ALL-REFRIGERATOR...
-
Page 2: Installation Instructions
(depending on how loaded the appliance is, the ambient temperature etc...). • The coils on the rear of the refrigerator should be cleaned and free of dust or any other impurities. • Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is 1/8”... - Page 3 CHANGING THE DIRECTION OF THE DOOR OPENING (SWING) If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared in the factory. Instructions for Use...
-
Page 4: Maintenance And Cleaning
Maintenance and Cleaning Automatic Defrosting of the Refrigerator There is no need to defrost the refrigerator, because the ice depositing on the inner back wall is defrosted automatically. Ice build-up on the inner back wall during the compressor operation; will (when the compressor has cycled off) defrost automatically. -
Page 5: Troubleshooting Guide
TROUBLESHOOTING GUIDE You can solve many common refrigerator problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. Refrigerator does not operate. • Not plugged in. -
Page 6: Temperature Selection
To turn the control to the “OFF” position, rotate the control knob to the “0” position. If the refrigerator has been left out of use for some time, set the control to maximum for 2-3 hours before turning to the desired position. If the refrigerator is not being used for long periods of time, disconnect the plug and leave the door partially open.
Need help?
Do you have a question about the FFAR2L and is the answer not in the manual?
Questions and answers