List Of Jumpers; Setting Jumpers - Asus AAEON BOXER-6839-CFL User Manual

2.3

List of Jumpers

Please refer to the table below for all of the system's jumpers that you can configure
for your application.
Label Function
JP19 Auto-Power Button Selection (AT/ATX Mode)
JP24 CMOS Control Selection (Clear CMOS)
2.3.1

Setting Jumpers

The BOXER-6839-CFL comes with several jumpers which allow you to configure the
system by either setting the jumper to "open" or "closed"; or by selecting certain pins.
A closed jumper has two pins connected with a jumper clip, while an open jumper has
no pins connected.
For jumpers with multiple pins, this guide uses "pins A-B" to notate which pins should
be connected by a jumper clip. For example, "pins 1-2" means you should connect pins
1 and 2, while "pins 2-3" means you should connect pins 2 and 3.
A pair of needle-nose pliers may be helpful when working with jumpers.
If you have any questions about how best to configure the system for your application,
contact your AAEON representative or visit our website to talk with our support team.
Chapter 2 – Hardware Information 9