Recharging - Samsung SR8874 User Manual

Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER

RECHARGING

You can have the robotic vacuum cleaner return
to the charger to charge the battery by using the
Recharging button.
When the robotic vacuum cleaner is operating, press
■
the ( ) button to cancel the operation and press the
Recharging button.
1. Press the Recharging button.
- The main unit icon (
vacuum cleaner will return to the charger.
2. To stop the robotic vacuum cleaner while it is
returning to the charger, press the (
3. To test the auto charge function, press the
Recharging button when the robotic vacuum cleaner
is less than 1.5 m from the charger.
Troubleshooting when the robotic vacuum cleaner
does not return to the charger
Check the installation of the charger
•
- When the charger is in a location where the charger
cannot guide the robotic vacuum cleaner to the
charger.
- When the charger is more than 5m away from robotic
vacuum cleaner.
: It may require a longer time for the robotic vacuum
cleaner to return to the charger.
Manually charge the robotic vacuum cleaner in the following
•
cases.
- When the charger is installed in a corner.
- When the battery is fully discharged.
- When the robotic vacuum cleaner is trapped by an
obstacle (furniture etc.)
- When the robotic vacuum cleaner cannot pass over the
doorsill to the location where the charger is installed.
28_ Operating the cleaner
) is turned on and the robotic
) button.
Using the remote
control
Using the main unit
buttons