Motorola PMTN4087 User Manual page 5

Power Sources and Motorola Authorized Transformers
These Class 2 battery chargers should be used with the direct
plug-in, Motorola authorized transformers listed below:
Table 2: Power Sources/Transformers
Charger Kit
Number
PMTN4087_
PMTN4088_
PMTN4089_
PMTN4092_
PMLN5201_
Operating Instructions
Single-unit chargers will charge only the Motorola authorized
batteries listed in Table 1. Other batteries may not charge.
To charge a battery:
1. Plug the transformer into the back of the charger.
2. Plug the transformer into the appropriate ac outlet. The charger
LED blinks once (green) to indicate a successful power-up.
3. Insert a battery, or a radio with battery (radio turned off), into
the charger's pocket.
4. The battery is properly seated in the pocket, when the charger
LED is red. The battery is fully charged, when the LED
illuminates a steady green light.
Power Source
108 – 132 VAC
(U.S. plug)
230 VAC (Euro. plug)
230 VAC (U.K. plug)
230 VAC
(China CCC plug)
230 VAC (Aust. plug)
3
Motorola Transformer
(part) Number
25009297001
2504548T14 (Alternate)
PS000037A01
2504548T03 (Alternate)
PS000037A02
2504548T02 (Alternate)
PS000037A05
2564060M02 (Alternate)
PS000037A03
2571886T01 (Alternate)