Setup The Camera - Motorola VM65 CONNECT User Manual

5.3 Set up the camera
Connect the Wi-Fi® camera (baby unit) to the power adaptor, then plug into
the wall socket. The camera must be within range of the Wi-Fi® router with
which you want to connect. Make sure the password of the router is available
for entering during the in-app setup process.
The following table shows the meanings of different LED connection status.
State
Pair / Setup
Connected
Video streaming
5.3.1 Set up user account and camera on your devices
You will need:
• Wi-Fi® camera (baby unit)
• Power adaptor for the camera
• Device with Android™ system version 7.0 and above, or
• iPhone®/iPad® with iOS version 10.0 and above
5.3.2 Connect the Camera
1. Switch off the parent unit before connecting the camera (baby unit) to
Wi-Fi®.
2. Connect the power adaptor to the power outlet and insert the plug into the
power socket on the back of the camera (baby unit). The camera turns on.
5.3.3 Download the App
Scan the QR code with your smart device and download the Motorola
1.
Nursery App from App Store for iOS devices or from Google Play™ Store
for Android™ devices.
2. Install the App on your device.
20
LED indication
Flashes blue and red
Solid blue
Flashes blue
Viewing the baby through your device