Alarm Link To A Position/Tour; Other Operations - EverFocus EPTZ3150 User Manual

5.6. Alarm Link to a Position/Tour

The speed dome has 4 alarm inputs that can be set to link to a position or a tour when an
alarm is triggered.
Set an alarm link:
Press F1 to set an alarm link. Enter the alarm number, and then press Enter.
Switch the Joystick up/down to select a position or a tour, enter a position or tour
number, and then press Enter to confirm the alarm link setting.
If you set the position number to 99, the dome will do a 360 degree auto scan or
AB two point pan if limit is ON. If you set the position number to 98, the dome will do
a frame scan.
Delete an alarm link:
Press Clr + F1 to delete a link of alarm to position/tour.
Note 1: After alarm output signal is terminated, the speed dome will resume action
or return to its original position.
Note 2: After powering on the speed dome, it will detect alarm status automatically.

5.7. Other Operations

The speed dome can work with a DVR that has PTZ control functions, and a
matching protocol. The available control functions depend on different DVRs.
The speed dome can work with a keyboard that has PTZ control functions, and a
matching protocol. The available control functions depend on different keyboards.
122