Display Internet Port Statistics - NETGEAR Nighthawk RAX80 User Manual

Display Internet Port Statistics

To display Internet port statistics:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Click the ADVANCED tab.
The ADVANCED Home page displays.
4. In the Internet Port pane, click the Show Statistics button.
The Show Statistics window opens and displays following information:
• System Up Time. The time elapsed since the router was last restarted.
• Port. The statistics for the WAN (Internet) port, LAN (Ethernet) ports, and WLANs. For
each port, the window displays the following information:
- Status. The link status of the port.
- TxPkts. The number of packets transmitted on this port since reset or manual clear.
- RxPkts. The number of packets received on this port since reset or manual clear.
- Collisions. The number of collisions on this port since reset or manual clear.
- Tx B/s. The current transmission (outbound) bandwidth used on the WAN and LAN
ports.
- Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN ports.
- Up Time. The time elapsed since this port acquired the link.
- Poll Interval. The interval at which the statistics are updated on this page.
5. To change the polling frequency, enter a time in seconds in the Poll Interval field and click
the Set Interval button.
To stop the polling entirely, click the Stop button.
Manage Your Router
Nighthawk AX8 8-Stream AX6000 WiFi Router
93 User Manual