Set Your Time Zone - NETGEAR Nighthawk RAX80 User Manual

2. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Advanced Setup > LED Control Settings. The LED Control Settings page
displays.
4. To disable blinking, select the DisableblinkingonInternetLED,LANLED,Wireless LED and USB
LED when data traffic is detected radio button.
5. To turn off all LEDs except the Power LED, select the TurnoffallLEDsexceptPower LED radio
button.
6. Click the Apply button.
Your settings are saved.

Set Your Time Zone

To set your time zone:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter http://www.routerlogin.net. A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > NTP Settings. The NTP Settings page displays.
5. Select your time zone from the menu.
6. If you live in a region that observes daylight saving time, select the Automatically adjust for
daylight savings time check box.
7. Click the Apply button.
Your settings are saved.
Manage Your Router
Nighthawk AX8 8-Stream AX6000 WiFi Router
101 User Manual