Denon AVC-X4700H Owner's Manual page 220

Contents Connections
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey ® Setup.
If you enable new speakers in the speaker configuration menu after
0
performing Audyssey ® Setup, you will no longer be able to select
Audyssey MultEQ ® XT32, Audyssey Dynamic EQ
Dynamic Volume ® . (v p. 183)
Changing the following settings:
0
Speaker size (Large or Small) / Distances / Levels / Crossovers settings
will not disable Audyssey ® or require running Audyssey
"Manual Setup" can be used without changing the settings. Please set if
0
necessary.
Front panel Display
Playback Settings
Amp Assign
Select the power amplifier usage method to match your speaker system.
o Assign Mode
Select how to use the power amp.
You need to configure the detailed settings for the speaker
® or Audyssey
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
® Setup again.
11.1ch:
220
Rear panel
Tips
Setting to use the 9-channel power
0
amplifier in this unit and an external
power amplifier connected to PRE OUT
to play back up to 11.1-channels.
You can connect speakers for up to 11.1-
0
channels for MAIN ZONE.
Remote Index
Appendix