Denon AVC-X4700H Owner's Manual page 195

Contents Connections
Output Settings
Makes settings for video output.
0 This can be set when "HDMI", "COMP" or "VIDEO" is assigned for each input
source. (v p. 205)
0 "Resolution", "Sharpness", "Progressive Mode" and "Aspect Ratio" can be set
when "i/p Scaler" is set to anything other than "Off". ("Resolution" (v p. 197),
"Sharpness" (v p. 197), "Progressive Mode" (v p. 198), "Aspect
Ratio" (v p. 198))
0 "Output Settings" cannot be set when 4K or 8K signals are input.
0 "Video Mode", "i/p Scaler", "Resolution", "Sharpness", "Progressive Mode" and
"Aspect Ratio" cannot be set when sound mode is set to "IMAX DTS" or "IMAX
DTS:X". ("Video Mode" (v p. 196), "i/p Scaler" (v p. 196),
"Resolution" (v p. 197), "Sharpness" (v p. 197), "Progressive
Mode" (v p. 198), "Aspect Ratio" (v p. 198))
0 "Video Conversion", "Video Mode", "i/p Scaler", "Resolution", "Sharpness",
"Progressive Mode" and "Aspect Ratio" settings are stored for each input source.
("Video Conversion" (v p. 196), "Video Mode" (v p. 196), "i/p
Scaler" (v p. 196), "Resolution" (v p. 197), "Sharpness" (v p. 197),
"Progressive Mode" (v p. 198), "Aspect Ratio" (v p. 198))
Front panel Display
Playback Settings
o HDMI Video Output
Select the HDMI monitor connector to be used.
Auto(Dual)
(Default):
Monitor 1:
Monitor 2:
0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and "Resolution" is set to "Auto", the signals are output with a
resolution that is compatible with both TVs. (v p. 197)
When the "Resolution" setting in the menu is not set to "Auto", set the
resolution in "Video" - "HDMI Monitor 1" and "HDMI Monitor 2" to one that is
compatible with both TVs. (v p. 261)
0 You can check which resolutions are compatible with your TV in "HDMI
Monitor 1" and "HDMI Monitor 2". (v p. 261)
0 When connecting multiple Dolby Vision TVs, the signal will only be optimal for
one TV. A TV connected to the HDMI MONITOR 1 connector has priority.
195
Rear panel
Tips
The presence of a TV connected to the
HDMI MONITOR 1 or HDMI MONITOR 2
connector is detected automatically, and
that TV connection is used.
A TV connected to the HDMI MONITOR
1 connector is always used.
A TV connected to the HDMI MONITOR
2 connector is always used.
Remote Index
Appendix