Denon AVC-X4700H Owner's Manual page 137

Contents Connections
Sound mode type
IMAX DTS This mode is automatically activated when playing back IMAX Enhanced content featuring a DTS bitstream. (v p. 176)
0
0
0
IMAX DTS:X This mode is automatically activated when playing back IMAX Enhanced content featuring a DTS:X bitstream.
(v p. 176)
0
DTS Neural:X This mode uses DTS Neural:X Upmixer to extend various sources to natural and realistic multi channels for playback.
Use height speakers such as front height speakers to realize a three-dimensional sound field.
This mode uses DTS Virtual:X with virtual height and virtual surround processing to realize a three-dimensional sound field
DTS Virtual:X 2 3
z z
when the height speakers are not used.
z1 This can be selected when "Speaker Config." - "Surr. Back" is not set to "None". (v p. 229)
z2 It cannot be selected when the input signal is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos.
z3 This can be selected when Height, Ceiling and Dolby Atmos Enabled speakers are not being used.
Front panel Display
Playback
Also this mode is selectable when "Surround Parameter" - "IMAX" is set to "On" in the menu and a 48 kHz sampling
frequency DTS 5.1 channel signal is being input.
When "Speaker Config." - "Surr. Back" is set to "2 spkrs", "Speaker Config." - "Center" is set to "Large" or "Small", and
sound mode is set to "IMAX DTS", surround audio is output from the surround back speaker. Audio is not output from
the surround speaker.
The bass information of speakers are not redirected to the subwoofer, but getting a better bass effect from front and
center speakers by special algorithm of IMAX when the "Front" and "Center" are set to "Small".
The bass information of speakers are not redirected to the subwoofer, but getting a better bass effect from front and
center speakers by special algorithm of IMAX when the "Front" and "Center" are set to "Small".
Rear panel
Settings
Description
137
Remote
Tips Appendix
Index