Axis P3818-PVE User Manual page 9

AXIS P3818-PVE Network Camera
Additional settings
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Settings > Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Local contrast slider to adjust the amount of WDR.
Find out more about WDR and how to use it at axis.com/web-articles/wide-dynamic-range.
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize the face of a person, you can use the
pixel counter.
1. Go to Settings > System > Orientation.
2. Click
3. In the camera's live view, adjust the size and position of the rectangle around the area of interest, for example where
you expect faces to appear.
You can see the number of pixels for each of the rectangle's sides (X and Y), and decide if the values are enough for
your needs.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
.
9