Axis P3818-PVE User Manual page 17

AXIS P3818-PVE Network Camera
Additional settings
5. In the list of ports, select Gate switch.
6. Set state to Active.
7. Set the duration.
8. Click Save.
Trigger an alarm if someone opens the housing
This example explains how to trigger an alarm if someone opens the housing.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select Casing open.
4. In the list of actions, select Send notification to email.
5. Select a recipient from the list or go to Recipients to create a new recipient.
To create a new recipient, click
6. Type a subject and a message for the email.
7. Click Save.
Set up the intrusion alarm
Before you start
• Connect the intrusion alarm switch to pin 1 (ground) and pin 3 (digital I/O) of the camera's I/O connector.
Configure the input port
1. Go to Settings > System > I/O ports.
2. For Port 1:
2.1 Select Input in the drop-down menu
2.2 Select Closed circuit (NC) in the drop-down menu
Create a rule
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under I/O, select Digital input.
. To copy an existing recipient, click
17
.
.
.