Advertisement
6. Towing procedure
‰
tPK2522 has a rolling load capacity of 2,000 kg, based on a level surface. remember the weight of towed vehicle should be
calculated to include any load in the vehicle, and to take into account any extreme gradients.
‰
WARNING! Before using equipment ensure you have read, understood and apply Section 1 safety instructions.
Towing eYeS - many vehicle manufacturers include a separate towing eye which is not permanently fixed to the chassis.
important: Before fitting the tow pole, to either vehicle, check the manufacturers' handbooks to ensure that the towing
points (do not use 'tie points') are suitable for use with a tow pole and are capable of safely withstanding a 'brake load'.
legal reQuiremenTS - it is the responsibility of the towing driver to ensure that all legal requirements are met. this includes
the towing operation and actions taken by the towed driver. check you are insured for towing. trade users must have a "trade
insurance Policy" which covers commercial towing. note the policy will not provide cover if the law is broken, or the weight of
towed load exceeds the capacity of the tow pole, or if towed vehicle weighs more than the towing vehicle. When calculating
the weight of the towed vehicle remember that any load carried in the vehicle must be added to the kerb weight indicated in the
manufacturer's handbook.
6.1.
When towing, unlock the steering wheel and activate the warning lights on both vehicles. ensure that the towed vehicle is in neutral,
the wheels are free to rotate, and that hand and foot brakes are disengaged.
6.2.
While driving, the tow pole must remain parallel with the direction of travel, i.e. if the tow fittings are placed on different sides of
the vehicles, it will be necessary to drive out of line (the car being towed would not be directly behind the one towing). Pole must
also be approximately parallel with the road surface i.e. with the towing eyes at similar height
6.3.
the distance between the vehicles must be enough for the driver in the towed vehicle to see the rear lights of the towing vehicle.
6.4.
a maXimum Speed oF 15mph should not be exceeded.
6.5.
Always take great care when towing and ensure a very gradual "take-up" when starting and braking.
warning! the tow pole and fittings are not able to withstand shock loads resulting from sudden changes in speed.
6.6.
After use, dismantle the tow pole, clean it and store it in a dry place. inspect regularly for signs of stress or wear. replacement parts
are not available for this unit.
environmenT proTecTion
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey group, kempson way, Suffolk Business park, Bury St edmunds, Suffolk. ip32 7ar
01284 757500
© Jack sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
tPK2522 | issue 3 (H, 1, 3, f) 10/11/17
Advertisement
