Advertisement
Quick Links
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small hardware which may have come loose inside the carton during shipment. Identify and count all
hardware and compare with the hardware list below.
When placing furniture on non-carpeted flooring, HMI recommends the use of floor protection such
as an area rug or furniture pads. Area rugs and padding not included with purchase.
No.
1
2
Side panel (L)
Side panel (R)
3
4
Description
No.
JCBC Bolt
A
B
Spring Washer
C
Flat Washer
Allen Key
D
Fitting-System 5
E
( 05656 + KT-9608 )
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS HEAD SCREWDRIVER
Made In Malaysia
ASSEMBLY INSTRUCTIONS
ITEM 305-P253550
Description
Top Panel
Back Panel
HARDWARE LIST
Size
M6 x 30MM
4 x 65MM
Residential Use Only
DESK
PARTS LIST
Sketch
M6
M6
-
Sketch
Quantity
1
1
1
1
Quantity
6
6
6
1
8
Page 1 of 4
Advertisement
Related Manuals for Living Spaces 305-P253550
Summary of Contents for Living Spaces 305-P253550
- Page 1 ASSEMBLY INSTRUCTIONS ITEM 305-P253550 DESK Thank you for purchasing this quality product. Be sure to check all packing material carefully for small hardware which may have come loose inside the carton during shipment. Identify and count all hardware and compare with the hardware list below.
- Page 2 ASSEMBLY INSTRUCTIONS STEP 1 Insert Fitting to the Side Panel (2) & (3) as shown. & STEP 2 Attach the Back Panel (4) to the Side Panel (R). Made In Malaysia Residential Use Only Page 2 of 4...
- Page 3 ASSEMBLY INSTRUCTIONS STEP 3 Attach the Back Panel (4) to the Side Panel (L). STEP 4 Turn the Desk upside down on the protective surface. Top Facing Down Firmly grab the drawer on each sides and slide out until it stops. Proceed to pull outward until the drawer track slips past the Stop.
- Page 4 ASSEMBLY INSTRUCTIONS STEP 5 Fixed the side panel base to the Top Panel (1) as shown. STEP 6 Align the side panel base to the Top Panel (1) and fasten it by using JCBC Bolt (M6) with Spring Washer and Washer. STEP 7 Insert the Drawer.