Summary of Contents for Living Spaces MATEO / COTTAGE 7030-01105
Page 1
7030-01105 KIT TWIN/FULL BUNK FRAME HARDWARE QTY: DESCRIPTION: 100MM DECORATIVE HEAD LAG BOLTS 4MM ALLEN WRENCH 1/2" X 3" FLUTED WOODEN DOWELS 6 X 1 1/4" PHIL FLAT SLAT SCREW 4MM DRIVER FOR POWER DRILL...
Page 2
- recommended: Drill for 4mm driver and phillips bit (not included) Phillips Head Screwdriver Make sure you have all parts before beginning assembly. If you need a part, contact Living Spaces. Assembly: Attach two 3" tall mattress rails(F) to two bottom end assemblies(D) with 8 lag bolts and tighten per above instruction.
Page 3
00500 SAFETY WARNING Our Bunk Beds have been tested by an Independent Laboratory and are certified to be in compliance with: ASTM F-1427, “Standard Consumer Safety Specification for Bunk Beds” and U.S. Government specifications 16 Code of Federal Regulations, parts 1213 and 1513. SAFETY WARNINGS 1.