Product Description; Specifications - Salter BPA-9200 Instructions And Guarantee

Table of Contents

Advertisement

PRODUCT DESCRIPTION

GB
Based on Oscillometric methodology and silicon integrated pressure sensor, blood pressure and pulse rate can be
measured automatically and non-invasively. The LCD display will show blood pressure and pulse rate. The most recent
2x60 measurements can be stored in the memory with date and time stamp. The monitor can also show the average
reading of the last three measurements.The Electronic Sphygmomanometers corresponds to the below standards: IEC
60601-1:2005/EN 60601-1:2006/AC:2010 (Medical electrical equipment -- Part 1: General requirements for basic safety
and essential performance), IEC60601-1-2:2007/EN 60601-1-2:2007 /AC:2010 (Medical electrical equipment -- Part 1-2:
General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility -
Requirements and tests), IEC 80601-2-30: 2009+Cor.2010/EN 80601-2-30:2010(Medical electrical equipment –Part 2-30:
Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers),
EN 1060-1: 1995 + A1: 2002 + A2: 2009 (Non-invasive sphygmomanometers - Part 1: General requirements), EN 1060-3:
1997 + A1: 2005 + A2: 2009 (Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-
mechanical blood pressure measuring systems).

SPECIFICATIONS

Product name:
Model
Classification
Machine size
Cuff circumference
Weight
Measuring method
Memory volume
Power source
Measurement range
Accuracy
Environmental temperature for operation
Environmental humidity for operation
Environmental temperature for storage and transport -20ºC~55ºC (-4ºC~131ºC)
Environmental humidity for storage and transport
Environmental pressure
Battery life
All components belonging to the pressure measuring
system, including accessories
Note: These specifications are subject to change without notice.
Blood Pressure Monitor
BPA-9200-GB
Internally powered, Type BF applied part, IPX0, No AP or APG,
Continuous operation
Approx. 138mm × 98mm × 48mm (5 7/16"x 3 27/32"x 1 7/8")
30cm-42cm (11 13/16"-16 17/32"), 22cm-30cm (8 21/32"-11
13/16") (Optional), 42cm-48cm (16 17/32"-18 29/32")
(Optional)
Approx. Approx. 211g (7 7/16 oz.) (exclude batteries and cuff)
Oscillometric method, automatic inflation and measurement
2x60 times with time and date stamp
Batteries: 4 ×1.5V
Size AA
Cuff pressure: 0-300mmHg
Systolic: 60-260mmHg
Diastolic: 40-199mmHg
Pulse rate: 40-180 beats/minute
Pressure: ±3mmHg
Pulse rate: ±5%
10ºC~40ºC (50ºF~104ºF)
≤90%RH
≤90%RH
80kPa-105kPa
Approx 500 times
Pump, Valve, LCD, Cuff, Sensor
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bpa-9200-gb

Table of Contents