Table of Contents
Advertisement
en operation
12.4 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Έναρξη/Παύση.
▶
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: "End".
12.5 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press Έναρξη/Παύση.
1.
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry while
the drum is rotating. If you want to
avoid or cancel the cooling pro-
cess, open the door.
→ "Display", Page 20
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Έναρξη/Παύση.
5.
12.6 Cancelling the pro-
gramme
Press Έναρξη/Παύση.
1.
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry while
the drum is rotating. If you want to
avoid or cancel the cooling pro-
cess, open the door.
→ "Display", Page 20
Open the appliance door.
2.
Remove the laundry → Page 30.
3.
12.7 Unloading the laundry
Open the appliance door.
1.
30
Remove the laundry.
2.
12.8 Switching off the appli-
ance
Turn the programme selector to
▶
12.9 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or during operation: .
Open the door.
1.
Remove the fluff from the door.
2.
.
Advertisement
Table of Contents
