Filter System On The Base Unit - Siemens WQ33G2D0GR User Manual And Installation Instructions

Table of Contents

Advertisement

en operation
Close the two fluff filters and put
9.
them together.
Insert the two-part fluff filter.
10.
Close the door.
11.
12.10 Filter system on the
base unit
During drying, fluff from the laundry is
collected in the base unit's filter sys-
tem. The filter system protects the ap-
pliance from fluff.
Cleaning the filter system on the
base unit
If the display shows a notification
while the appliance is in operation,
clean the base unit's filter system.
Notes
¡ You can clean the filter regularly
system even without the notifica-
tion being shown on the display.
It is not necessary to clean after
each drying cycle.
32
¡ If you do not clean the appliance
as described, the appliance's func-
tionality may be impaired.
Requirement: The display shows the
following during operation:
Clean the fluff filter → Page 30.
1.
Open the base unit → Page 35.
2.
Carefully remove the filter mat from
3.
the retainers.
Ensure that you do not deform or
damage the filter mat.
Use a soft brush to clean the heat
4.
exchanger cover.
Make sure that you remove all dirt
from the seal.
.

Advertisement

Table of Contents
loading

Table of Contents