Installing and removing capsule
B
Caring for your base
Cleaning the base:
•
Wipe with a mild solution of soap and water.
NEVER
•
use household detergents as they can weaken the plastic.
Important information:
•
NEVER
lubricate or oil any part of the base.
•
NEVER
use solvents, harsh detergents or washing up liquids.
•
Dry thoroughly before storage.
•
Store in a well-ventilated area, away from direct sunlight.
•
Store in a safe place when it is not being used. Avoid placing
heavy objects on top of it.
•
NEVER
allow the seat to come into contact with corrosive sub-
stances such as battery acid or petroleum products.
designed in NZ
Installing:
Place the car seat capsule onto the base
A
until you hear a distinct
capsule should be firmly secured. You
can check this by firmly pulling the seat
upwards.
IMPORTANT
positioned in B when driving.
Removing:
With the handle in position A, press the
red lever downwards and lift the car seat
up at the same time.
CLICK!
- The handle must be
The
12