Table of Contents
Advertisement
5 Installation
5.1 Safety instructions
Heat production during appliance
operation
Risk of fire
• Check that the carcase material is heat
resistant.
• Check that the carcase has the required
openings.
Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (>90°C), otherwise they might
warp over time.
The minimum clearance between a
ventilation hood and the cooking
surface must be at least the
distance indicated in the ventilation
hood installation instructions.
The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the mounting
illustrations.
Installation
5.2 Section cut from the countertop
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
L (mm)
600
750
1000
A (mm)
min 200 min 460 min 750 40 - 60
X (mm)
560 - 564
700 ÷ 704
880 - 884
B (mm)
C (mm)
D (mm)
Y (mm)
482 - 486
482 - 486
482 - 486
E (mm)
min 50
41
Advertisement
Table of Contents
