Expanded Menu; Saving Dsc Settings; Restoring Dsc Settings - Blaupunkt CCU 02 MP3 PROFESSIONAL Operating Instructions Manual

DSC menu

Expanded menu

The CCU 02 offers the option to expand the
menu of each source.
If you select the "Expanded menu" option
("HMI EXTENDED"), you can call up the au-
dio settings for every source in the remote
menu of each source and change them
(same as the AUD button) and select an-
other source ("SOURCE") (same as source
buttons on the device).
To switch the "Expanded menu" on or off,
u press the DSC button <.
u
Select " DSC" with the right rotary/
*
pushbutton :.
u Press the right rotary/pushbutton :.
The display shows "CODE".
u Press the left I and the right rotary/
pushbutton : at the same time for
confi rmation until a beep sounds.
u
Select " HMI" with the right rotary/
*
pushbutton :.
Press the right rotary/pushbutton :.
u
u
Select "EXTENDED" for the expanded
or "SHORT" for the simplifi ed menu
with the right rotary/pushbutton :.
Press the right rotary/pushbutton :.
u
u Select : "NAME ON" with the rotary/
pushbutton to display the track name
or "NAME OFF" to display the track
number.
u
To confi rm, press the right rotary/push-
button :.
74
Note:
"NAME ON/OFF" applies to CCU and
CVX as well as to CDs with CD text and
MP3 CDs. The media must support the
function.
u Hold the ESC ; button pressed until a
beep sounds and the menu is exited.

Saving DSC settings

You can save your DSC settings and access
them again by resetting.
u Press the DSC button <.
u
Select " DSC" with the right rotary/
*
pushbutton :.
u Press the right rotary/pushbutton :.
The display shows "CODE".
Press the left I and the right rotary/
u
pushbutton : at the same time for
confi rmation until a beep sounds.
u
Select "SAVE DSC" with the right rota-
ry/pushbutton :.
u Press the right rotary/pushbutton :.
The settings are saved.
u Hold the ESC J button pressed until a
beep sounds and the menu is exited.

Restoring DSC settings

You can restore your previously saved DSC
settings.
Press the DSC button <.
u
u
Select "RESTORE" with the right rotary/
pushbutton :.
u Press the right rotary/pushbutton :.
The settings are restored.
u Hold the ESC J button pressed until a
beep sounds and the menu is exited.