Selecting The Video Out Signal; Setting The Date And Time - Epson P-1000 User Manual

Selecting the Video Out Signal

If you have connected an external monitor (as described on
page 19), you may need to change the video output signal
method. When you select
Choose or . (Televisions sold for the North
NTSC PAL
American market are NTSC.) If you change the setting
while a device is connected, disconnect and reconnect the
Video cable.
, you see this screen:
Video Out

Setting the Date and Time

Select to change these settings:
Date and Time
Date and Time Settings
Year: Month:
2003 01
Hour: Minute:
12 00
Use the up or down button to select the year. Press OK to
apply the setting.
Press u or d on the arrow button to change the value for
the selected item (such as the year).
To go to the next option (
l or r. Then press u or d to change that setting.
After you finish making all settings, press the
Note:
If you remove the P-1000's battery, the date and time settings
will be erased after about two days; so you'll need to check and
possibly change the settings. You'll also need to check the date
and time after changing the battery to make sure they are set
correctly.
Day:
01
Format:
YYYY.MM.DD
or , for example) press
Month Day
button.
OK
Customizing Settings 49