Application Examples; Dialing A Remote Modem; Dial A Stored Number - Epson ESC/VP21 User Manual

6- APPLICATION EXAMPLES

6.1 Dialing a Remote Modem

Command line: ATDP9WT002, (886)-7128423<CR>
This command line instruct the modem to dial a remote modem through a PBX.
The modem first use pulse dialing to dial 9 (the access mde of the PBX), wait for
outside dial tone, and then use touch tone dialing to dial 002 once a one-second
continuous dial tone is detected within 30 seconds, pause for 2 seconds (if S8=2)
and then dial 8867128423.

6.2 Dial a Stored Number

Command line: AT&Z2=T03,709394<CR>
Command line: ATDS=2<CR>
The first command line store the dial string T03, 709394 to the 3rd location in
NVRAM. Afterwards you can use the second command line to dial this stored
number. The dial string T03, 709394 will appear on the screen to indicate the num-
ber being dialed.
6 - APPLICATION EXAMPLES
67