Commands Preceded By - Epson ESC/VP21 User Manual

Fax/data modem

Hide thumbs Also See for ESC/VP21:

Table of Contents

The partial connect message reports CONNECT, the full message reports CON-

NECT XXXX, where XXXX is the data rate.

Enables or Disables Long Space Disconnect

Reset

Zn,

must be placed at the end of the command line, resets the active configu-

which

ration of the modem to the stored configuration saved in nonvolatile RAM, hanngs

up the modem. and clears the command buffer.

2.2.a Commands Preceded by &

&Cn

Select DCD Options

&C0

&C1

2 - COMMAND REFERENCE

Disables Long Space Disconnect.

Enables Long Space Disconnect.

Resets the modem and loads stored

configuration 0. (default)

Resets the modem and loads stored

configuration 1.

Maintains an ON status for the Data Carrier

Detect. (DCD)

Uses the actual state of the carrier from the

remote modem for DCD. (default)

(default)

Table of Contents