2.2b Commands Preceded by\
\An
Maximum MNP Block Size
maximum block size for MNP connections. Use this command to transmit
Sets
smaller blocks of data in a reliable link connection,
\A0
\A1
\A2
\A3
\Bn
Transmit Break
This command causes the modem to send a break (Attention signal), for a duration
specified by 'n', to the remote modem. When n = 0, the default break length is used.
n= 0-9
\Cn
Set Auto-reliable Buffer (requires a license from Microcom ®
In auto-reliable mode (\N3), this command determines the fallback method and
enables data buffering. The settings for this command are used by the modem
during the V.42 detection phase.
2 - COMMAND REFERENCE
Sets maximum block size to 64 characters.
Sets maximum block size to 128 characters.
Sets maximum block size to 192 characters.
Sets maximum block size to 256 characters
(default)
Break length in 100 msec.
17