Epson ESC/VP21 User Manual page 17

Fax/data modem

Hide thumbs Also See for ESC/VP21:

Table of Contents

Return to the On-line State

Applies to asynchronous operation only. If the user enters the command mode from

the data mode by issuing the escape sequence, or as a result of ON-to-OFF transi-

tion of DTR with the AT&D1 option in effect, the user may return to the data mode

without terminating a call by issuing the ATO command.

Set Pulse Dial as Default

Causes the modem to assume that all subsequent dial commands are pulse dialed.

You may omit the "P' from the dial strings.

Result Code Display

Determines whether the modem sends the result codes to the DTE.

2 - COMMAND REFERENCE

Causes the modem to return to the data mode. (default)

Enters on-line data mode with a retrain before returning

to on-line data mode.

Allows the modem to send result codes to the

DTE. (default)

Prohibits the modem from sending result codes

to the DTE.

Table of Contents