Table of Contents
Advertisement
6-3 Error List
Refer to "5-10 Termination Code List" also.
♦ ♦ ♦ ♦ Host communication error
Error Code
"10"
Parity error
"11"
Framing error
"12"
Overrun error
"13"
BCC error
"14"
Format error
"18"
Frame length error
♦ ♦ ♦ ♦ Communication error
Error Code
"70"
Communication error
"71"
Verification error
"72"
No existence error
"7A"
Address error
"7B"
Battery voltage low
"7D"
Write Protect error
♦ ♦ ♦ ♦ System error
Error Code
"92"
Antenna failure
"93"
Tag memory error
Name
• Checking the setting about conditions of communication with a host device.
→ Refer to Sections 5-9-7 and 5-9-9.
• Wiring of RS-232C, RS-422A and RS-485 (Example: Terminating resis-
tance and influence of ambient noise)
→ Refer to Sections 4-2, 4-3 and 6-3.
• How to calculate BCC → Refer to Section 5-3.
• Wiring of RS-232C, RS-422A and RS-485 (Example: Terminating resis-
tance and influence of ambient noise)
→ Refer to Sections 4-2, 4-3 and 6-3.
• Format of command (Example: Applicable characters and position of STX/ETX)
→ Refer to Sections 5-7 to 5-9.
Name
• Distance between an antenna and tag, and tag movement speed.
• Wiring of FG, power cable, etc. (Influence of ambient noise)
• Noise environment around antenna. (FG ground of devices, shield and loca-
tion change)
→ Refer to Sections 4-2, 4-3 and 6-3.
• Noise environment around antenna. (FG ground of devices, shield and loca-
tion change)
→ Refer to Sections 4-2, 4-3 and 6-3.
• Distance between an antenna and tag, and tag movement speed.
• Designation of address/number of bytes of executed command.
• Tag memory capacity and applicable address range.
→ Refer to Section 5-7.
• Traffic, ambient temperature and battery life.
→ Section 2-2-6.
• Setting of Write Protect information.
→ Section 3-6.
• Designation of address/number of bytes of executed command.
→ Refer to Section 5-7.
Name
• Antenna indicator.
→ Section 6-2.
• Take out of the communication area, return to the area again and check the
termination code.
If the same error occurs, replace a tag with a new one.
Check Points
Check Points
Description
6-3
Advertisement
Table of Contents
