Table of Contents
Advertisement
4
Maintenance > Related Service Mode > Invalidating the License for Transfer to a Different Device (Level 2) > Screen Design:
Related Service Mode
Invalidating the License for Transfer to a Different
Device (Level 2)
Service Mode Item Used to Invalidate a License for Transfer to a Different Device (Level 2)
■ Possible Situation
A license may be used on a different device through transfer, as when replacing the device
at the end of a lease agreement. To do so, the user must first invalidate the existing license
by performing a set of steps referred to as "invalidation of a license" using service mode. At
times, both source and target of transfer may be the same device, and a license therefore
may also be invalidated only temporarily. It is important to note that the user must contact
the Sales Company to make a license good regardless of whether it has been invalidated
intentionally or inadvertently.
■ Invalidation Procedure
Invalidation consists in invalidating the license in service mode and generating an invalidation
certificate that proves the completion of invalidation. Invalidation may take place for individual
optional functions, and a specific function becomes no longer available as soon as an
invalidation certificate is issued. The user contacts the Sales Company and provides the
following: the invalidation certificate, the device serial number of the source of transfer, the
device serial number of the target of transfer, reason of transfer. In response, the Sales
Company may issue a license key for new installation on a different device. The user must
take note of the new license key in writing, and keep it as a record after registering it to the
target device.
■ Installation Procedure
1. Start service mode, and activate Level 2 so that the following is true:
COPIER>OPTION>LCNS-TR
The following screen appears, showing the current status of various options:
4
Maintenance > Related Service Mode > Invalidating the License for Transfer to a Different Device (Level 2) > Screen Design:
B
A
C
8245 2383 2489 1137 9802 2395
■ Screen Design:
SET-xxxx: indicates the license status. If installed, the option is identified as '1' under A.
To invalidate an option for transfer, select it, and type in '0' under B; then, click [OK] so that
the option will be invalidated and an invalidation certificate will be issued.
TR-xxxx: indicates any invalidation certificates that have been generated under C.
xxxx may be any of the following:
TR-XXXX
Detail
SEND
SEND function
ENPDF
Encrypted PDF
SPDF
Searchable PDF
EXPDF
PDF Expansion
PDFDR
Direct print PDF
SCR
Encrypted Secure Print
HDCLR
Data Erase(for Old model)
BRDIM
Barcode Printing for PCL
VNC
Remote Operators Software
WEB
Web Access Software
HRPDF
High Compress PDF
WTMRK
Secure Watermark
TSPDF
Time Stamp PDF(JP Only)
USPDF
Digital User Signature PDF
4-7
F-4-3
4-7
Advertisement
Table of Contents
