Epson Perfection 600 Quick Start Manual page 23

3. Insert the hinge brackets on the transparency
unit into the slots at the back of the scanner.
4. Insert the end of the cable attached to the
transparency unit into the
connector on the back of the scanner.
5. Locate the power adapter that came with the
transparency unit. Carefully insert the power
adapter plug into the back of the transparency
unit.
6. Connect the power cord to the power
adapter, and then plug the other end of
the power cord into a wall outlet.
If you haven't connected the scanner to your
computer, continue with "Connect the
Scanner to Your Computer" on page 10.
OPTION
OPTION connector
power adapter
plug
power adapter
19